![]() These replacement sections allow you to easily remove your present lead/acid section and replace it with a lithium unit. Present RV has a Progressive Dynamics PD4000 Series Converter/Charger Note: Progressive Dynamics has two converter/charger replacement sections for the PD4000 series units. Present RV has a Progressive Dynamics PD9200 Series Converter/Charger Present RV has a Progressive Dynamics PD9100 Series Converter/Charger ![]() Depending on your knowledge of electricity you may want to consult a licensed electrician or RV technician for assistance. Once Converter/Charger Section mounting screw is removed, (mark the location & color) of the wires then disconnect five colored wires and slide out present Lead/Acid section and replace with the new Lithium Section reconnecting the wires to their proper location. Replacement requires removal of the front panel of your present Wall Mount unit to gain access to the Converter/Charger Section. The fourth photo on this page shows a typical Lithium Replacement Section for All Wall Mount units. ![]() WARNING! Disconnect all 120 VAC power before removing and replacing converter/charger section! NOTE: Lithium Replacement Sections are only available for Progressive Dynamics and WFCO Wall Mount units. These Replacement Lithium Sections are available from our approved distributors. Updating to a Lithium Battery System requires the removal and replacement of the present slide out Lead/Acid Converter/Charger Section with one designed to charge Lithium Batteries. The unit also includes a 12-Volt DC Fuse Panel to supply 12-Volt power to all 12-Volt circuits. The Wall Mount units as their name implies are mounted in the RV interior wall or cabinet for easy accessibility and include a removable Converter/Charger Section, a 120 VAC Distribution Panel with a 30 or 50 Amp Main AC Circuit Breaker and several 120 VAC AC Branch Circuit Breakers. Eleven-branch DC circuits are available with LED lights for each DC circuit to illuminate and identify open circuits.WARNING! Do not replace your present Lead/Acid Converter/Charger or Converter/Charger Section with a Lithium Model with an Amp rating higher than the D.C Amp output rating of your present unit as your RV wiring is may not be capable of safely handling this extra current! They can accommodate a 30 Amp main AC circuit breaker and up to five branch circuits. The 8900 Series models provide AC and DC distribution with innovative features. Electronic current limiting automatically shuts down the power during overload or short-circuit conditions, protecting the life of your power center and electrical system. The 8900 Series also maintains peace and quiet, as the cooling fan runs only when needed.įCC Class B compliance for every power center model means that the units are designed not to cause interference with televisions, radios, or other signals. Automatic three-stage charging extends the life of your battery with output voltage modes of 13.2 VDC range “float” mode, 13.6 VDC range “absorption” mode, and a 14.4 VDC range “bulk” charge mode. ![]() The WF-8955 model provides 55 Amps and a clean, constant 13.6 VDC nominal output, for reliable operation of electronics and appliances. The WF-8900 Series has revolutionized RV power centers with its lighter weight, decorative doors and superior features. (Fully compatible with WF-8955AN, with next generation faceplate design) ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |